Do NOT ATTEMPT TO PURCHASE THIS UNLESS WE HAVE PERSONALLY EMAILED EACH OTHER ABOUT IT, YOUR ORDER WILL BE CANCELLED IMMEDIATLEY
DO NOT EMAIL ME :
THE V5 prototypes are sold out
V5 Prototype is here for my oldest customers
This is the first of a 2-Part/shipment order
The v5 is my latest project, I have always enjoyed the instant hits I get from my v3 and being able to place my concentrates directly on the donut. My goal has always been to make a cup that completely heats. After searching quite a bit I feel a I found a alumina ceramic supplier who could make a quality side and bottom heated crucible that would be affordable as well.
Over the last year I have been able to use a few types of heaters in various sizes and this cup is my last choice after doing 3 different molds.
I have found that I can self clean this cup if done carefully and under 38w on a pico or rim c mod(some mods produce more power than others even when set to the same settings, be careful) Making sure you note the ohm reading when you first install the v5 is important. Knowing this number will tell you the condition of your cup. I have cracked many cups experimenting and cleaning at 40+watts, and you will notice a rise in ohms when this happens along with slight cracks in the crucible. So when cleaning i usually go up to a max temp using only 38w and doing several sessions allowing for the mod/unit to completely cool down before attempting to do another burnoff cleaning session. Sometimes it will take up to 4 sessions to get the cup back to its white color ..
For settings i have a arctic fox profile i use at 40sec and then it turns off, TCR is 180 using 38w to get to 490f, email me for latest config, also please share your feedback and settings on the reddit v5 page https://www.reddit.com/r/DTv5Beta/ or on discord
non arctic fox mods or stock firmware use NI mode 38w to get to temp you desire. you may choose another setting so dialing it in for yourself will be needed. Remember start at low setting and work up ,not the other way around.. sometimes wattage mode and a good feel will work best. Practice.
Try not to char or burn your concentrates into bowl, allow for some oil to be left over to swab up and this will ensure that you will not be cleaning so often .. finding the perfect time to let off button or stop session will take practice.. your feedback on your settings is welcome and anything thing else you like or don’t like, if we build consensus for this prototype it could take another form possibly. the v5 is still fluid. Please share, I will be watching the subs and taking notes to make a standard for settings, care and possible changes to the design.
What you get with the kit/ first shipment:
- the v5 side and bottom heater diffuser ready to go
- metal window top
- extra ceramic heater (Keep under 38w)
- extra screws
- extra orings
- qtips/ alcohol wipes
- dab tool
- Green or White Silicone Attachment (we choose color if you don’t let us know in the checkout notes)
some things to take note of, on this batch many of the heaters will not allow the core/Hyperion/sequoia coil crucibles(SIC, and QUARTZ inserts) to fit, they are off by 1/4mm however some will fit, so on the second shipment of this order one of the items you will be getting is another heater, one that will be able to fit our inserts. For the second shipment you will also get any finalized version of the v5 whether we put fins in the window mouthpiece or we change the base we will send you a completely updated version. you will also get the thicker all glass vortex top(having a tough time getting those dialed but confident it will happen).
2nd Shipment: (shipped when final version is released to public (SEPTEMBER WE ARE HOPING)
- All glass thick vortex top
- another spare side and bottom heated crucible cup (38w max/)
- any revised parts produced in final version
I have ordered a small amount of seamless bottomless bangers and new dabber vortex carb caps (see pics) from a new supplier that will fit the v5 and will be available to purchase in these links below. we also have a nice little affordable dab rig if you need one to add in
When the main v5 release comes we will have 1,3, and 5 packs of heaters for affordable prices. along with all glass tops and many other accessories. this heater will be the new platform for a easy v5(similar to ez sai),new heater for the core, along with the forced air nice dreamz..