v3.5 Rebuildable Ceramic Heater

The Divine Crossing V3.5 is the fourth collaboration between Shenzhen Crossing and Divine Tribe. This rebuildable ceramic donut atomizer was designed from the ground up to deliver pure, clean concentrate flavor without the metallic taste of traditional coil atomizers. If you believe in tasting the terpenes in your concentrates, this is the device that started it all.

The V3.5 uses a ceramic donut heating element inside a ceramic cup, providing even heat distribution for smooth, flavorful vapor. Compatible with any 510-threaded box mod battery with temperature control, this wax atomizer gives you full control over your concentrate vaping experience.

2 Extra Replacement Donuts & Cups
Medium 10mm donut cup + Large 13mm donut and cup

Extras Included
5 extra screws, 2 alcohol wipes, extra O-ring set

Temperature Control — Use Ni (Nickel) TC mode for 100x better experience than wattage mode

510 Threaded — Fits any standard 510-thread box mod battery (battery not included)

Two Donut Sizes — Medium 10mm and Large 13mm options for different session preferences

Temperature Control Mode (Recommended)

Fine-Tuning with TCR

First-Time Setup

Always start at the lowest setting and work up. This protects your atomizer and helps you find the lowest temperature that still produces great flavor and clouds.

Use Ni (Nickel) TC mode on your box mod. Start at the lowest wattage or temperature and work your way up. Find your sweet spot — some prefer hot heavy hits, others enjoy cooler clouds with more flavor.

For advanced users: Try TCR value around 190 for accurate temperature readings. Pair with 380–420°F for tasty, smooth, cool clouds. Infrared thermometer confirms donut temp matches screen at these settings.

Hold the device straight up and down (not sideways) to ensure the best hit.

Clear out the atomizer after each session. Do not store concentrates in the device or leave it in hot cars.

The V3.5 is fully user-serviceable. Follow these steps to replace the ceramic donut:

Step 1: Find a clean work area so screws do not fall and get lost

Step 2: Gently pull the ceramic housing from the metal base

Step 3: Unscrew both screws that hold the donut wires to the 2 posts

Step 4: Gently wiggle and remove the ceramic cup in an upward motion from the posts

Step 5: Carefully remove the donut coil from the cup — the wires bend and break easily

To Rebuild: Follow these steps in reverse. Each piece can be cleaned separately with rubbing alcohol and a wipe.

Width: 21.9mm

Inner Mouthpiece Diameter: 17.8mm

Heating Element: Ceramic Donut (10mm & 13mm)

💧 HydraTube Water Filtration Smooth, cooled vapor attachment

🔄 Replacement Donuts & Cups 10mm & 13mm donut cup sets

Interested in distribution to shops and friends? Email to discuss terms for selling the V3.5.

Past customers: email matt@ineedhemp.com for a discount.