Divine Crossing v5 Rebuildable Heater & Pico Plus Power Supply
$117.84 – $157.44
Ω Divine Crossing Version 5 Rebuildable Concentrate Ceramic Heater w/ Pico Plus Power Supply
– The Divine Crossing v5 Rebuildable Ceramic Heater starter kit now paired with the iStick Pico Plus, which has been upgraded with DivineTribe’s autofire firmware for a bundled package.
Divine Crossing v5 Pico Complete Kit
Introducing the Divine Crossing v5 Rebuildable Heater paired with the iStick Pico Plus, a comprehensive kit designed for seamless vaping experiences. Engineered with eco-friendly principles in mind, the V5 boasts a replaceable and rebuildable design, featuring a side and bottom heated ceramic cup with vortex airflow for precise temperature control. Paired with the iStick Pico Plus, equipped with DivineTribe’s Autofire Firmware, users can effortlessly adjust session durations and enjoy instant ignition with a simple double-click, making it the ultimate combination for convenience and performance.
Take Immediate Caution: Ceramic heater cups can get up to 600°F and could cause serious burns. Please be careful when handling the unit.
Kit Includes:
- Complete v5 assembled (ready to go)
- 1 extra v5 side and bottom ceramic heater cup
- 1 extra window for steel top
- Dab tool
- 4 extra screws, tool and o-rings
- Cotton swabs and alcohol wipes
- v5 Instruction Manual
- Pico Plus power supply w/ autofire firmware
- USB Type-C Cable
- Sony vtc6 18650 battery
Innovative Design:
- Each part of the Divine Crossing Version 5 is replaceable and the entire unit rebuildable, embodying eco-friendly principles.
- Featuring a side and bottom heated ceramic cup with vortex airflow, offering temperature control for an optimal vaping experience.
Power Supply Settings:
- TCR Value: 200 using 36w to reach 500°F
- Wattage: 27-37w with a pulsing button.
How to use:
Always keep your O-rings clean and lubricated with a vegetable oil of your choice. This makes it easier to remove the top. Place a small amount (2-5 hits max) of concentrate into the side and bottom heated ceramic cup. Keep the unit upright throughout the whole session; do not tip or the concentrate will pour out of the cup. Press the button on the mod to start heating the cup and allow the concentrate to boil and vaporize. Now draw slowly; this will allow for maximum vapor and conserve concentrates in the cup from splashing out. Make sure to maintain heat on the cup so that vapor is produced throughout the session. Sessions should not exceed one minute.
Keep the temperatures low enough to avoid burning concentrates to a char (dry).
Always use a Q-tip to clean the cup after each session to maintain cleanliness and performance. Wipe down and clean the glass top while it’s still warm to avoid reclaim buildup in the vapor pathway. Allow the unit to cool down for 3 minutes before the next session.
Installing New Ceramic Heater:
Under the right settings, these cups should last a long time. When a ceramic heater cup goes out or the resistance rises, you can replace it by unscrewing two of the screws that keep the cup’s lead wires fastened to the deck. Loosen the screws, then gently pull the cup out and remove it.
Every now and then, you will want to burn off residue on the cup. Set the mod to 38W in wattage mode (this can be less for some mods; always start low and see). Hold it upside down while delivering only two minutes of heat to the cup, then STOP and allow it to completely cool off before the next cleaning session.
iStick Pico Plus 75w Power Supply:
Equipped with DivineTribe’s Autofire Firmware, allowing adjustment of session duration for maximum convenience.
✨ Five-click power on/off – Easy control with a simple click sequence.
✨ Double-click for auto-fire – Instant ignition for maximum convenience. (THIS FEATURE IS EXCLUSIVE to Divine Tribe)
✨ Three-click access to wattage or M1 Temperature mode – Seamless mode switching for optimal performance.
✨ Customize time settings from 0 to 60 seconds – Personalize your sessions with precision timing by holding the power and + button simultaneously.
✨ Easily lock resistance – Ensure stability by pressing the main button and the minus button.
✨ Adjust TCR when the unit is off – Fine-tune your Temperature by holding down both the power and + button simultaneously when the unit is off.
Accessories Compatible with the v5:
Additional Questions or Concerns ❓
- Be sure to check out our
.png)
YouTube page for instructional videos. Also, check out our forum on Reddit. We are an active community with many users ready to help out. - As always feel free to contact matt@ineedhemp.com with any issue. 📧
- Join our community on Discord for additional support and discussions! 💬
| Weight | N/A |
|---|---|
| Drip Tip Option | SteelTip + Black Silicone 14/18mm Adapter, SteelTip+Glass 14mmMale Tip, SteelTip + Green Silicone 14/18mm Adapter, SteelTip+White Silicone 14/18mm Adapter, SteelTip+Glass 18mmMaleTip |
| 3 and 6pk Heater cups | no xtra heaters or spacers, add on 3pk heater cups, add on 6pk heater cups, add 3pk heater & 1 Spacer, add 6pk heater & 2 Spacers |
| Color | Silver, Black, Grey |
2 reviews for Divine Crossing v5 Rebuildable Heater & Pico Plus Power Supply
Only logged in customers who have purchased this product may leave a review.
Related products
Core eRig
Complete Kits
leslie van vliet (verified owner) –
This kit is the best if you like to tinker and find the best hit you can get being able to put it in watt mode and burn off the coil and it looks brand new is the coolest thing my TCR is 210 watt set at 36w and the temp at 470 did the Qtip test it was perfect
David Castellucci (verified owner) –
Very satisfied with the purchase, highly recommended. Takes a min. to get up-to-speed as a new user but there’s a YT vid on DT’s channel that answered all my questions.
The amt. of vapor & taste is immense, I’m a daily user but been a min. since I’ve been this baked. Definitely a worthwhile purchase for concentrates!