✨ Recycler Top Core XL Deluxe ✨
XL Nice Dreamz Coil & Mini Recycler Glass Top 🌿
🔥 Ultimate Modular Vaping
The Recycler Top Core XL Deluxe is crafted for enthusiasts, featuring a Mini Recycler Glass Top, XL Nice Dreamz Coil, and Spinner Titanium Carb Cap. Enjoy upgraded airflow, fast heat-up, and splash-free draws in a durable carry case. 🌬️✨

🎁 What’s Included?
|
E-rig Base Unit 🔌 |
Mini Recycler Top 🍃 |
|
Spinner Titanium Carb Cap & Sleeve 🔄 |
Carb Cap Tether (Black) 🔗 |
|
Silicone Base Cover/Sleeve (Black) 🖤 |
XL Nice Dreamz Coil Assembly 🌈 |
|
Spare XL V5 Heater 🔥 |
SS316 Dab Tool 🛠️ |
|
4x Spare Coil Screws 🔩 |
Screwdriver 🔧 |
|
2x Spare Carb Cap Tube O-rings 🔵 |
US Wall Plug ⚡ |
|
USB-C Charging Cable 🔌 |
Cotton Buds/Q-tips 🌿 |
|
Alcohol Wipes 🧼 |
|
🌟 Mini Recycler Glass Top Features
|
Active vapor circulation 💨 |
Splash-free design 🧼 |
|
High-quality glass 🌟 |
Secure fit with base 🔒 |
|
Compact & portable 🚀 |
Multi-setup compatible 🔧 |
|
Robust build 🛡️ |
Sleek aesthetics ✨ |
|
Unique recycler design 🎨 |
|
🛠️ Setup Instructions
- Charge base with provided wall plug and cable. ⚡
- Fill bubbler from top when removed. Clear excess liquid by blowing into air hole. 💧
- Align bubbler hole with vapor pathway, push firmly onto base. 🔗
- Tighten atomizer screws gently, screw into base. 🔩
- Position carb cap tube with wider side up, keep cap on tether. 🔄
- Select heat setting, start low and adjust. 🌡️
- Check included instructions for details. 📖
🎮 Device Controls
|
One Click: Cycle 6 temp settings. 🌡️ |
Two Clicks: Activate session mode, one click to cancel. 🔄 |
|
Four Clicks: Show power level (Red/Low, White/Medium, Green/Full). 🔋 |
Five Clicks: Lock/unlock base unit. 🔒 |
🌡️ Session Times & Temperatures
Upgraded to 80 seconds total session time, including pre-heat.
|
Purple 💜 – Lowest |
Yellow 💛 – 2nd Lowest |
|
Blue 💙 – Middle |
Green 💚 – Middle High |
|
White 🤍 – 2nd Highest |
Red ❤️ – Highest |
🧼 Cleaning Instructions
- Wipe heater with Q-tip after each use. 🧹
- Clean RDA heater area weekly to prevent buildup. 🌿
- Wipe airway with ISO-soaked Q-tip monthly, dry fully. 🧼
- Replace bubbler water daily. 💧
- Clean bubbler with hot water, shake, soak in ISO, rinse. 🫧
- Burn-off RDA heater at 36W for 1-2 minutes using a heat sink. Heater Coil Link 🔥
🛡️ Safety Features
|
Over-charge ⚡ |
Over-discharge/Low battery 🔋 |
|
Over-heat 🔥 |
Low heater resistance 🌀 |
|
Short-circuit ⚠️ |
|
🚨 Warning Lights
Base flashes three times to indicate:
|
Blue 🔵 – Short-circuit |
Green 🟢 – No atomizer |
|
White ⚪ – Over-heat |
Red 🔴 – Low battery |
📜 Certifications
|
CE Certified ✔️ |
ROHS Certified Materials ♻️ |
|
FCC Certification 📡 |
FDA Approved Silicone 🧴 |
|
UN 38.3 Certified Battery 🔋 |
|
🛠️ Warranty Information
|
Contact store for claims 🏬 |
🔗 Accessories
2 reviews for XL Recycler Top Core Deluxe eRig w/ 6 Heat Settings -Titanium Sleeve and Carb CapOnly logged in customers who have purchased this product may leave a review. LoginRegister | |||||||||||||






















Spmex7 (verified owner) –
This thing is dope, adds a little height to the core which is a plus for me. I have all the bubbler attachments for the core and this is by far the smoothest one and definitely looks the best. In my opinion this is a must have for the core. Just buy it I promise you won’t be disappointed.
cypherpunkd (verified owner) –
I was shopping around for a new erig and I’m glad I went with the Core 2.0 because it’s the best device I’ve owned so far. It’s absolutely amazing with the SiC crucible insert and terp pearls (the material is incredibly non-stick) though it does require additional preheating to get the metal bucket warmed up. I get half of the estimated 20-25 uses per charge from using additional battery power for the extra preheating, but I use a magnetic USB-C cable adapter plugged into the port, so hooking it up for recharging is very quick and zero-effort.
I give it a 9.9/10 only because the top of the aluminum carb cap gets a bit too warm after repeated use with no cool down period, but I fixed this with a 3/8″ rubber thread protector cut to a reduced length, then pushed over the tip of the cap to give it a heat-resistant handle. I got a protector in black to match the black device and accessories, but if you have a different color silicone base + tether you can easily find a thread protector to match your color scheme.