Recycler Top Core eRig w/ Nice Dreamz Coil
$165.00 – $185.00
Introducing the Recycler Top Core eRig w/ Nice Dreamz Coil system for concentrates, using the v5 side and bottom heated cup!
The new Nice Dreamz assembly style lowers exposes the edges of the cup for an easier way to load the concentrates into the cup.
Disclaimer: For International Orders (non USA domestic shipments) – Shipping will cost more than $19 please message matt@ineedhemp.com for a shipping quote before ordering.
Introducing the Recycler Top Core eRig w/ Nice Dreamz Coil – Elevating Your Dabbing Experience!
Discover the latest evolution of our flagship eRig, the Core 2.0. We’ve taken everything you loved about the Core and elevated it to new heights with the introduction of our Recycler Top and the innovative Nice Dreamz Heater Coil assembly.
Key Features:
1. Recycler Top: Our redesigned Recycler Top takes the Core 2.0 eRig to the next level. Experience smoother, more efficient airflow as your vapor is cycled through the recycler system, resulting in enhanced flavor and a cooler hit.
2. Nice Dreamz Heater Coil: The heart of the Core 2.0, the Nice Dreamz Heater Coil, offers an unparalleled dabbing experience. With a modified assembly style, we’ve lowered the supportive metal ring around the heater cup. This clever design exposes the edges of the cup, making loading your concentrates easier than ever before. Say goodbye to wastage and hello to precision dabbing.
With this new Core 2.0 eRig option, we understand that options matter. For those who appreciate the convenience of having a backup, we have the option to include an additional standard stock top (photo included above). You’ll never have to worry about interruptions to your dabbing experience.
Upgrade your dabbing game with the Recycler Top Core eRig w/ Nice Dreamz Coil – where innovation meets performance. Redesigned for the discerning dabber, it’s time to elevate your concentrates to the next level. Explore the Core 2.0 eRig today and experience the future of dabbing!
If your Recycler Top ever breaks in the future or you are looking an additional top option ensure you’re ready with our replacement top options under this link. Don’t let a broken top disrupt your dabbing experience—stay ahead and stay prepared.
Core 2.0 Features
- One button functionality for ease of use
- Fully heated high polish ceramic vaping surface – elements inside base and walls of heater
- Rebuildable atomizer
- Borosilicate Glass Bubbler
- Stainless Steel Carb Cap Tube
- Four carefully tuned heat settings
- Low maintenance
- Approx. 1 hour 45 minute charging time
- 3150mah Li-Ion Battery Pack
- Approx. 21 full sessions – mixed power settings
What’s Included
- Core 2.0 E-rig Base
- Recycler Top
- Spinner Carb Cap
- Carb Cap Tether (black)
- Silicone Base Cover/Sleeve (black)
- 1x Nice Dreamz Coil Assembly with V5 heater installed
- 1x Spare V5 Heater
- SS316 Dab Tool
- 4x Spare coil Screws
- Screwdriver
- 2x Spare Carb Cap Tube O-rings
- 1x US Wall Plug
- 1x USB-C Charging Cable
- Cotton buds/Q-tips
- Alcohol wipes
- Upgraded Carry Case
Core 2.0 Instructions
- Hold – Manual fire up to 60 seconds
- Two clicks – Activate session mode – One click to cancel
- Three Clicks – Change heat setting
- Four Click – Display power level – Red/Low – White/Medium – Green/Full
- Five Clicks – Lock or unlock Core 2.0 Base
Sessions times and temperatures
The total session time for the Core 2.0 has been upgraded to 80 seconds, this includes the pre-heat time.
- Blue – 12.5 second pre-heat – Approx. 401f
- Green – 13 second pre-heat – Approx. 428f
- White – 17.5 second pre-heat – Approx. 464f
- Red – 22.5 second pre-heat – Approx. 500f
Setup
- Charge your base using the provided wall plug and cable.
- Fill bubbler from the top, when it is removed from the base. Ensure any excess liquid has been wiped away and that no water has flooded into the bottom compartment. If this happens turn the bubbler upside down and blow into the air hole at the bottom to clear this section. Then re-fill from the top.
- Place bubbler onto Core 2.0 Base at an angle, ensuring that the hole in the bubbler base aligns with the vapor pathway in the Core 2.0 base, then gently and firmly push it straight down into place.
- Check small screws in the atomizer base which hold the heater legs are fastened. These need to be tightened so they are firm, but not so much that they cut the wire legs off the heater. When this is done screw the atomizer into the Core 2.0 base.
- Place the carb cap tube on the base so that the wider angled side sits at the top, leaving the carp cab on the tether so that concentrate can be loaded onto the heater.
- Select desired heat setting (start low and work up to desired heat).
See Instructions included with Core 2.0 for more session and usage details
Cleaning
- Wipe out heater with a q-tip after each use
- Clean the area around the RDA heater weekly to stop residue building up
- Every month, approximately, wipe out the airway with a q-tip soaked in ISO – allow to fully dry before use
- Replace bubbler water daily
- To clean bubbler fill with hot water and shake to remove large residues. Soak in ISO to fully clean. Rinse thoroughly with warm water after soaking.
- RDA heater can be removed and screwed into a heat sink on a box mod, then run at 36W for 1-2 mins to perform a burn off cycle. Link for that here.
Safety Features
- Over-charge
- Over-discharge/Low battery
- Over-heat
- Low heater resistance
- Short-circuit
Certifications
- CE Certified
- ROHS Certified Materials
- FCC Certification
- FDA Approved Silicone
- UN 38.3 Certified Li-Ion Battery Pack.
Warning Lights – When the Core 2.0 base flashes three times that is a message…
- Blue – Short-circuit warning
- Green – No atomizer warning
- White – Over-heat warning
- Red – Low battery warning
Warranty information
- For all warranty claims please contact the store purchased from.
- The Core 2.0 power base and carry case is covered by a one year manufacturer warranty against defects.
Parts for Core 2.0
Replacement Glass Tops for Core
Carb Caps, Silicon Base, Tethers, Slide on Coil Protectors
3mm, 4mm and 5mm Silicon Carbide SIC Balls / Pearls for your Banger, Inserts, and Crucibles
Parts for Core 1.0
Ceramic Disc Heaters to Rebuild Heater Coil Assemblies
Additional Questions or Concerns
- Be sure to check out our YouTube page for instructional videos. Also be sure to check out our forum on Reddit. We are an active community with many users ready to help out.
- As always feel free to contact matt@ineedhemp.com with any issue.
| Weight | 7 oz |
|---|---|
| Include Standard Stock Glass Top | Include, Do Not Include |
2 reviews for Recycler Top Core eRig w/ Nice Dreamz Coil
Only logged in customers who have purchased this product may leave a review.
Related products
Accessories
Core eRig
Spmex7 (verified owner) –
This thing is dope, adds a little height to the core which is a plus for me. I have all the bubbler attachments for the core and this is by far the smoothest one and definitely looks the best. In my opinion this is a must have for the core. Just buy it I promise you won’t be disappointed.
cypherpunkd (verified owner) –
I was shopping around for a new erig and I’m glad I went with the Core 2.0 because it’s the best device I’ve owned so far. It’s absolutely amazing with the SiC crucible insert and terp pearls (the material is incredibly non-stick) though it does require additional preheating to get the metal bucket warmed up. I get half of the estimated 20-25 uses per charge from using additional battery power for the extra preheating, but I use a magnetic USB-C cable adapter plugged into the port, so hooking it up for recharging is very quick and zero-effort.
I give it a 9.9/10 only because the top of the aluminum carb cap gets a bit too warm after repeated use with no cool down period, but I fixed this with a 3/8″ rubber thread protector cut to a reduced length, then pushed over the tip of the cap to give it a heat-resistant handle. I got a protector in black to match the black device and accessories, but if you have a different color silicone base + tether you can easily find a thread protector to match your color scheme.