Thank you for your interest in the Divine Crossing Version 3 ceramic rebuildable atomizer and taking the step away from metal coil heaters to something cleaner. I believe in tasting the terpenes in my concentrates without a metallic flavor. This is the third collaboration between Shenzhen Crossing and Divine Tribe, we have exchanged drafts and ideas to create a unique diffusion device. Here are a few instructions I would like to pass along to make your experience better.

If your battery has a temperature control option please Temperature Control in Ni (Nickel Mode)

I have noticed 100x better experience with temperature control rather than just wattage mode.

-SET THE BATTERY FIRST-

First time using the device start at the lowest wattage or temperature depending on your mod and work your way up. By doing this you are testing yourheater and finding the lowest setting in order to get the best essence and biggest cloud. Find the middleground for the best experience. Not all people enjoy the same settings, some like it hot with huge hits some enjoy easy clouds with more flavor. Find your best setting through practice. If you mess around with trying to fine tune your TC settings, you should try a TCR # of around 190 if you like the temperature on the screen to match the actual donut temp. Probably will not be final, or the best settings for all users on all mods, but I’m getting great, tasty, smooth, cool clouds with TCR 190 and 380-420F, and my infrared thermometer says the donut is the same temp as the screen at those settings.

For more information and questions visit the DivineTribe YouTube channel

Instructions when using

Place half bb sized piece directly on donut, when hitting the vaporizer draw in lightly at first to avoid upward splatter. Hold it straight up and down, Not out and sideways, this will ensure you get a good hit.

For best performance do small sessions and keep the piece clean with rubbing alcohol and a wipe.

Do not leave in hot cars

Do not store concentrates in device

Clear out heater after each session

Rebuild and Cleaning instructions

Find clean area to work so screws do not fall to floor and get lost

Unscrew 3 screws at base of ceramic housing

Gently pull ceramic housing from metal base

Unscrew both screws that hold donut wires to the 2 posts

Gently wiggle and remove ceramic cup in an upward motion from posts

Be careful with donut wires when removing donut coil from cup they will bend and break easy

To Rebuild follow these steps in reverse

Each piece can be cleaned separately with rubbing alcohol and a wipe

Visit

www.szcrossing.com

for wholesale orders of 50 pcs or more

V3 specs:

Overall length- 56.6mm
Width- 21.9mm
Cup diameter- 11.8mm
Inner mouthpiece diameter- 17.8mm

Here is a link to the replacement v3 ceramic housing.

Here is a link to the replacement v3 ceramic top piece.

Here is a link to the replacement v3 ceramic donuts.

Weight	3.88 oz
Color	Black, White

3 reviews for Divine Crossing Version 3 Rebuildable Ceramic Donut Heaterr – Fcombustion Discount Link

Rated 5 out of 5

Brian Hogan (verified owner) – June 4, 2017

This thing is f-ing magnificent. I absolutely can’t recommend this enough if you’re looking for an easy-to-use, load-as-you-go concentrate atomizer. This ceramic donut “coil” provides the best tasting experience I’ve been able to find so far, and this includes low-temp dabs from well-seasoned quartz nails in traditional dab rigs heated by a butane torch. In my experience you usually have to decide between thick, lung-busting hits that degrade the flavor of your concentrate or wispy, dinky clouds that don’t even register in your lungs but taste a lot better. That dichotomy isn’t a problem with the DCv3 when set to ~18w, 365f.

It’s very, very simply to clean and rebuild with the whole process taking about an hour, the majority of which is time spent soaking the pieces in Isopropyl alcohol. My only complaint would be that it’s possible to fracture the ceramic housing which screws onto the atomizer base if you’re careless with the included screwdriver. You’d have to give them a fair amount of torque to do so, but it is definitely possible. That said, Matt offers replacement housings and mouthpieces for very, very fair prices which can be found in the accessories section.

It’s also worth mentioning that the DCv3’s mouthpiece is the perfect diameter for Humboldt Vape Tech’s reverse-banger adapter, which allows this atomizer to be attached to a dab rig. If you’re a fan of water-filtration it’s worth looking into, but it’s absolutely not necessary to make the DCv3 worth buying, especially through this link which is basically a 50% discount.
Rated 5 out of 5

Kirk Norman (verified owner) – February 25, 2018

Utterly amazing: the flavor, the vapor quality, the materials….an amazing atomizer.
The addition of a second full 13mm dish and donut, as well as the 10mm dish and donut are great.

I am one of those people who likes taking things apart and tinkering with things, so I am a fan of being able to take everything apart and examine it for cleaning and reassembly.
If you don’t enjoy this…..well, this attachment is still worth it 😀

I’m finding my cleaning/reassembly to take about ~20-30 min, most of which I spend doing something else while the parts soak in isopropyl. Reassembly is quick, just a few min.

You do have to be somewhat gentle with reattaching the atomizer/screws to not accidentally hurt anything, but I haven’t had any problems.
However if you are looking for a very well made attachment and atomizer for both amazing flavor and satisfyingly big clouds…..I can not recommend this enough, nor can I think of a reason not to get one at this amazing price.
Rated 5 out of 5

Spmex7 (verified owner) – March 16, 2018

Definitely worth a try at this price. Even at full price it’s worth it, if you like tasty lower temp hits then this is the atomizer for you.