Divine Crossing v5 Rebuildable Heater & iStick Pico Plus Power Supply

Name: Divine Crossing v5 Rebuildable Heater &amp; iStick Pico Plus Power Supply
SKU: 165314
Availability: InStock
Rating: 5.00 (1 reviews)

Rated 5.00 out of 5 based on 1 customer rating

(1 customer review)

$122.84 – $162.44

The Divine Crossing v5 Rebuildable Ceramic Heater starter kit now paired with the iStick Pico Plus which has been upgraded with DivineTribe’s autofire firmware for a bundled package.

Ω Divine Crossing Version 5 Rebuildable Concentrate Ceramic Heater w/ Pico Plus Power Supply

Drip Tip Option

3 and 6pk Heater cups

Color

Clear

Add to Wishlist

v5 Rebuildable Heater & iStick Pico Plus Power Supply

Introducing the Divine Crossing v5 Rebuildable Heater paired with the iStick Pico Plus, a comprehensive kit designed for seamless vaping experiences. Engineered with eco-friendly principles in mind, the V5 boasts a replaceable and rebuildable design, featuring a side and bottom heated ceramic cup with vortex airflow for precise temperature control. Paired with the iStick Pico Plus, equipped with DivineTribe’s Autofire Firmware, users can effortlessly adjust session durations and enjoy instant ignition with a simple double-click, making it the ultimate combination for convenience and performance.

Take Immediate Caution: Ceramic heater cups can get up to 600°f and could cause serious burns. Please be careful when handling the unit.

Innovative Design:

Each part of the Divine Crossing Version 5 is replaceable and the entire unit rebuildable, embodying eco-friendly principles.
Featuring a side and bottom heated ceramic cup with vortex airflow, offering temperature control for an optimal vaping experience.

Power Supply Settings:

Wattage: 27-37w with a pulsing button.
TCR Value: 200 using 36w to reach 500°F

How to use:

Always keep your O-rings clean and lubricated with a vegetable oil of your choice. This makes it easier to remove the top. Place a small amount (2-5 hits max) of concentrate into the side and bottom heated ceramic cup. Keep the unit upright throughout the whole session; do not tip or the concentrate will pour out of the cup. Press the button on the mod to start heating the cup and allow the concentrate to boil and vaporize. Now draw slowly; this will allow for maximum vapor and conserve concentrates in the cup from splashing out. Make sure to maintain heat on the cup so that vapor is produced throughout the session. Sessions should not exceed one minute.

Keep the temperatures low enough to avoid burning concentrates to a char (dry).

Always use a Q-tip to clean the cup after each session to maintain cleanliness and performance. Wipe down and clean the glass top while it’s still warm to avoid reclaim buildup in the vapor pathway. Allow the unit to cool down for 3 minutes before the next session.

Installing New Ceramic Heater:

Under the right settings, these cups should last a long time. When a ceramic heater cup goes out or the resistance rises, you can replace it by unscrewing two of the screws that keep the cup’s lead wires fastened to the deck. Loosen the screws, then gently pull the cup out and remove it.

Every now and then, you will want to burn off residue on the cup. Set the mod to 38W in wattage mode (this can be less for some mods; always start low and see). Hold it upside down while delivering only two minutes of heat to the cup, then STOP and allow it to completely cool off before the next cleaning session.

iStick Pico Plus 75w Power Supply:

Equipped with DivineTribe’s Autofire Firmware, allowing adjustment of session duration for maximum convenience.

Experience effortless functionality with our comprehensive instructions:

✨ Five-click power on/off – Easy control with a simple click sequence.

✨ Double-click for auto-fire – Instant ignition for maximum convenience. (THIS FEATURE IS EXCLUSIVE to Divine Tribe)

✨ Three-click access to wattage or M1 Temperature mode – Seamless mode switching for optimal performance.

✨ Customize time settings from 0 to 60 seconds – Personalize your sessions with precision timing by holding the power and + button simultaneously.

✨ Easily lock resistance – Ensure stability by pressing the main button and the minus button.

✨ Adjust TCR when the unit is off – Fine-tune your Temperature by holding down both the power and + button simultaneously when the unit is off.

Effortless Functionality:

Equipped with DivineTribe’s Autofire Firmware, allowing adjustment of session duration for maximum convenience.
Five-click power on/off feature for easy control.
Double-click for auto-fire, providing instant ignition.
Three-click access to wattage or M1 Temperature mode for seamless mode switching.

Customization Options:

Customize time settings from 0 to 60 seconds by holding the power and + button simultaneously.
Easily lock resistance for stability by pressing the main button and the minus button.
Adjust TCR when the unit is off by holding down both the power and + button simultaneously.

Features:

Accepts heaters up to 25mm in diameter, offering compatibility with various setups.
Powered by a single 18650 battery (Sony VTC6 included), reaching up to 75 watts in VW mode.
Equipped with USB Type-C and 2A charging current for fast charging.

Pico Plus Specifications:

Size: 47mm x 25mm x 70.6mm
Material: Aluminum alloy, Zinc alloy
Output Wattage: 1-75W
Charging Current: 5V/2A (USB-C)
Resistance Range: 0.3ohm-3.5ohm
Modes: Wattage, M1 TC (100-315℃ or 200-600°F)

Kit Includes:

Complete v5 assembled (ready to go)
1 extra v5 side and bottom ceramic heater cup
1 extra window for steel top
Dab tool
4 extra screws, tool and o-rings
Cotton swabs and alcohol wipes
v5 Instruction Manual
Pico Plus power supply w/ autofire firmware
USB Type-C Cable
Sony vtc6 18650 battery

For DNA mods The Vapor Ninja has taken the time to figure it out click here to go to his site for settings and other useful information

Accessories Compatible with the v5

Replacement v5 Side and Bottom Heated Ceramic Cups/Spacers

v5 Spare Parts

v5 Polished SiC Insert

Bottomless banger and New Dabber Vortex Carb Cap

Affordable Dab Rig

Silicon Tip/Attachment

Glass Tip/Attachment

Steel Vortex Window Top

Glass Vortex Top

Ω Video on how to get V5 lead wire centered for lowest resistance possible Ω
byu/divinetribe1 inDivineTribeVaporizers

Additional Questions or Concerns

Be sure to check out our YouTube page for instructional videos. Also be sure to check out our forum on Reddit. We are an active community with many users ready to help out.
As always feel free to contact matt@ineedhemp.com with any issue.

Weight	N/A
Drip Tip Option	SteelTip + Black Silicone 14/18mm Adapter, SteelTip + Green Silicone 14/18mm Adapter, SteelTip+White Silicone 14/18mm Adapter, SteelTip+Glass 18mmMaleTip
3 and 6pk Heater cups	no xtra heaters or spacers, add on 3pk heater cups, add on 6pk heater cups, add 3pk heater & 1 Spacer, add 6pk heater & 2 Spacers
Color	Rose Gold, Silver, Black, Grey, White

1 review for Divine Crossing v5 Rebuildable Heater & iStick Pico Plus Power Supply

Rated 5 out of 5

leslie van vliet (verified owner) – May 13, 2024

This kit is the best if you like to tinker and find the best hit you can get being able to put it in watt mode and burn off the coil and it looks brand new is the coolest thing my TCR is 210 watt set at 36w and the temp at 470 did the Qtip test it was perfect

Only logged in customers who have purchased this product may leave a review.