V5 Spare Parts
Price range: $4.04 through $12.12
Genuine replacement parts for the Divine Crossing V5. O-rings, ceramic spacers, the 510 pin, the steel window top and its glass slides, screws and tools.
Pick your part in the dropdown. Everything here ships free inside the USA.
- Over 18,000 orders shipped
- Shipped to over 40 countries
- 1 year warranty on battery devices
- Every part sold separately
V5 Spare Parts
Genuine replacement parts for the Divine Crossing V5, the 510 threaded rebuildable atomizer with the side and bottom heated polished alumina ceramic cup. The V5 is built to be opened, so nothing about it becomes disposable because one small component wore out. An o-ring, a spacer or a glass slide is a few dollars and gets the atomizer back to new. Pick your part in the dropdown above.
Seals and contact
4pk O-Rings for V5 Base
Seals the base. Replace them when you feel resistance assembling the device, or when a seal stops holding air.
V5 Steel Drip Tip O-Rings
The pair that seals the steel drip tip into the top.
V5 510 Pin
The 510 contact pin at the base, the electrical connection between the atomizer and your mod.
Ceramic spacers
2pk Ceramic V5 Spacer
Sets the spacing for heat transfer inside the atomizer. Two in a pack.
Single Coil Ceramic Spacer
Jet Stream spacer, single coil configuration.
Double Coil Ceramic Spacer
Jet Stream spacer, double coil configuration.
Tops and glass
Vortex Window Top
The steel window top assembly, the part you watch your dab through.
2pk Glass Slides
Replacement viewing windows for the steel window top. Two in a pack.
V5 Steel Drip Tip
The steel drip tip on its own, the mouthpiece in the top.
Hardware and tools
4pk 1.5mm Hex Screws and Tool
Mounting hardware plus the hex tool that fits them, so a stripped or lost screw is not the end of a build.
Stainless Dab Tool
The loading tool, stainless steel.
Knowing when to swap something
When to replace an o-ring
The tell is friction. Any time you feel resistance or stiffness while assembling the device, the o-rings are drying out. They rarely fail suddenly, they stiffen first.
Before you buy new ones, try re-lubricating the ones you have. A tiny amount of oil on a fingertip, a thin film and not a glob, rolled around the whole ring, then wipe the excess. Do this after any alcohol cleaning without exception, because iso strips the oil out of rubber. Full detail is in the cleaning and maintenance guide.
When to replace a cup or spacer
Buildup hardens with each session until it interferes with heat transfer and starts degrading the heater. Burn-off cleaning uses the heater’s own power to reduce that buildup to ash, and a few seconds with nothing loaded loosens things up (here is the burn-off on video). If a cup shows heavy buildup that will not burn off, or any cracking, swap it. Cups and spacers are cheap enough that there is no reason to run a compromised one.
Rebuilding the V5
If you are rebuilding rather than replacing hardware, read Wire Science and Rebuilding first. It covers why set it and forget it beats chasing settings, and what your resistance should look like on a healthy build.
Not sure which part you need
Email matt@ineedhemp.com and describe what is happening, or ask in r/DivineTribeVaporizers or the Divine Tribe Discord. A photo of the part gets you an answer faster than naming it.
| Weight | 1 oz |
|---|---|
| Dimensions | 6 × 5 × 3 in |
| V5 Parts List | 2pk ceramic v5 spacer, 4pk 1.5mm hex Screws and Tool , 2pk Glass Slides for Vortex Window Top, Vortex Window Top, 4pk O-rings for v5 Base, Single Coil Ceramic Spacer for Jet Stream, Double Coil Ceramic Spacer for Jet Stream, Stainless Dab Tool, v5 510 Pin, v5 Steel Drip Tip O-rings, v5 Steel Drip Tip by Itself |
Only logged in customers who have purchased this product may leave a review.
Related products
Accessories
Reviews
There are no reviews yet.