10mm dab rig guide: joint sizes, bangers, bubblers and how to heat one

10mm recycler glass rig

A 10mm dab rig is a glass rig with a 10mm joint, the smallest standard size, which keeps the whole setup compact. The banger, terp slurper or bubbler you put on it has to match that joint, so the first thing to know before you buy any glass is the joint size and whether it is male or female. We sell two 10mm rigs, a 10mm bubbler with a sidecar handle from $62.62 and a 10mm recycler rig from $85.85, and every banger and slurper on this page comes in a size that fits them. Everything here ships free inside the USA.

10mm, 14mm and 18mm: what the number means

The number is the width of the ground glass joint. A male joint slides into a female one, so a 10mm male banger goes into a 10mm female rig. Our concentrate glass is sold in all three sizes. The bottomless banger comes in 10mm or 14mm male, 45 or 90 degree. The terp slurpers come with a 10mm or 14mm stem, and the coil support version includes a 14mm adapter so it drops into either joint. The HydraTube is 14mm or 18mm, and the Hubble Bubble is 14mm. If you already own a rig, measure or read the joint before ordering a banger, and pick the angle (45 or 90 degree) that lets the banger sit level on your rig.

The two 10mm rigs we sell

The 10mm sidecar handle bubbler has a barrel perc for a smooth, cool hit and a side handle that adds balance and extra water capacity, so it feels solid in the hand and stays clean longer. It is the affordable daily driver at $62.62 for the bubbler alone, $82.82 with a 25mm or 30mm terp slurper, or $178.77 as the full kit with the slurper, a matched flex coil and a single controller box.

The 10mm compact recycler rig is the shop tested favorite here, chosen for its hits and its 10mm size. It is $85.85 on its own, $106.05 with a 25mm or 30mm terp slurper, or $202 as the full kit with the slurper, flex coil and controller box.

Both rigs use the same add ons, so the choice is the glass: the bubbler if you want the handle and the lower price, the recycler if you want the recycler function.

Three ways to heat a dab rig

A glass rig does nothing on its own. You heat it one of three ways, and the way you pick decides which banger to buy.

Torch and a quartz banger. The classic way. Our compact glass rig with banger comes with a standard 25mm quartz banger and a bubble carb cap for $56.56, and you torch the banger. Fill the rig to the right water level, put the banger on, heat it, load, and use the bubble cap to control airflow.

eNail coil and a controller. No torch, and the temperature holds where you set it. The eNail flex coil wraps around a 25mm or 30mm terp slurper or banger ($65.65 for one coil) and runs on any of our controllers. The full kits on both 10mm rigs above include the coil and the single controller box. If you prefer a flat coil, the 20mm quartz banger with bubble carb cap ($25.25, 14mm male or 18mm male or female, 2.5mm thick) fits standard 20mm round eNail coils. That 20mm banger is what Matt uses at home. Browse everything in eNails, and read how to use an eNail if it is new to you.

A V5 heater on a bottomless banger. This is the one that turns any rig into an eRig. The bottomless quartz banger is $18.18 on its own, 25mm outer diameter, in 10mm or 14mm male and 45 or 90 degree. Your V5 sits in it, so the side and bottom heated ceramic cup does the heating and the rig does the water. Add a bubble carb cap for $25.25, or an aluminium or titanium carb cap with two 4mm SiC terp pearls for $25.25 and $29.29. The compact glass rig above is also sold with the bottomless banger instead of the standard one ($56.56) or with both ($64.64). Bottomless bangers work fine with XL cups too.

Terp slurpers on a 10mm rig

A terp slurper is a tower style banger that pulls the concentrate up through the tower as you draw. Ours come in a 25mm or 30mm base, 45 or 90 degree, with a 10mm or 14mm stem, $30.21 for one or $40.40 for two. Standard slurpers come with a pillar and marble. The coil support slurper ($33.21 in either size) comes in a 25mm or 30mm base, 45 or 90 degree, with a 10mm stem, almost twice the diameter of the standard tube so it holds heat longer, and it comes with a specialized carb cap and a 14mm adapter. The coil support means it does not tilt or move around in your flex coil the way a standard tube does. If you are running a flex coil, get the coil support version.

Water filtration for a heater you already own

If you do not want a full rig and just want water on your V5 or Lightning Pen, that is what the Hubble Bubble ($27.26, or $36.55 with the stand) and the HydraTube (from $55.55) are for. The Hubble Bubble is 127mm tall and lives on top of the device. The HydraTube is the bigger piece, thick borosilicate with a wide base, 14mm or 18mm, and the 18mm version is built for maximum airflow and deeper hits. Neither needs a banger; they fit the heater’s 14mm joint directly.

Handling a banger so it lasts

When you take a heater out of a bottomless banger, hold the base of the banger walls and the metal base of the heater, then pull straight up with a small twist. Never at an angle, that is what cracks the walls. Hold a banger by the bowl, not the stem. Run a bottomless setup on a flat wide table with a dab mat and room to work, and keep the o-rings tight, a loose fit is where the trouble starts. For a HydraTube, rinse with warm water, use alcohol with salt for a deeper clean, and let it dry upside down. Glass is not covered by warranty, so these habits are the warranty.

Not sure you want a glass rig at all?

If you would rather have the water built in and the battery inside, read the best portable dab rig guide. If you are choosing between a torch rig, an eNail and an eRig, the eRig buyer’s guide is the place to start. Everything glass we sell is in the glass collection.

10mm dab rig questions

Is a 10mm or 14mm dab rig better?

10mm keeps the setup compact, which is why both rigs we sell are 10mm. 14mm is the common size for water attachments like the HydraTube and Hubble Bubble. Our bangers and terp slurpers come in both, and the coil support slurper includes a 14mm adapter, so either rig works with the rest of our glass.

What size banger fits my dab rig?

Match the joint. A 10mm female rig takes a 10mm male banger, a 14mm female rig takes 14mm male. Then pick 45 or 90 degree so the banger sits level. Our bottomless banger comes in 10mm and 14mm male, 45 and 90.

Do I need a torch for a dab rig?

No. A torch is one option. An eNail flex coil and controller holds the temperature for you, and a V5 heater in a bottomless banger needs no torch either, it runs on a Pico Plus.

Can I run a V5 on a regular glass rig?

Yes. Put the V5 in a bottomless quartz banger in your rig’s joint size (10mm or 14mm male) and the heater does the heating while the rig does the water. The banger alone is $18.18.

What is a terp slurper?

A tower style banger that pulls the concentrate up through the tower as you draw. Ours come in 25mm or 30mm bases with a 10mm or 14mm stem, from $30.21, and the coil support version is made for the eNail flex coil.

Like this? Make Divine Tribe a preferred source on Google.

Leave a Reply

Part of the Divine Tribe family of brands · Marijuana Union · Nice Dreamz Wholesale · Tribe Seed Bank