✨ Ruby Twist Ball Vape ✨
Dual Controller Wired & Wireless Kit 🌿
🔥 Unmatched Flavor & Vapor
The Ruby Twist wired and wireless kit delivers premium dry herb vaping with gemstone-cut rubies and the Twist airflow. Switch between wired and wireless with the dual controller for seamless, high-performance sessions. 🌬️✨
🎁 Kit Contents
|
|
🌟 Premium Extras
|
|
🎉 Matt’s Take
“The wireless setup stays hot for 45-60 seconds – with this dual system, the party never stops! Back-to-back sessions while the wireless reheats…”
🌟 Key Features
|
Dual Controller: Wired or wireless flexibility ⚡ |
Ruby-Filled Heater: Superior flavor & vapor 💎 |
|
Twist Airflow: No stirring needed 🌬️ |
🔗 Accessories
|
eNail Controllers 🔌 |
Ruby Corundum Pearls 💎 |
|
Wireless Dock Station 🔋 |
Glass & Titanium Bowls 🥄 |
🌐 Join Divine Tribe
Ruby Twist: The Best Ball Vape for Dry Herb
The Ruby Twist is a desktop ball vaporizer that uses a titanium chamber of gemstone-cut rubies for convection heating. Ball vapes have become a favorite way to vape dry herb, and the Ruby Twist is one of the most popular ball vapes in the community, with its twist-action injector design and optional wireless operation. Unlike traditional desktop vaporizers, the Ruby Twist ball vape heats your herb instantly through hot ruby pearls, extracting maximum flavor and potency with zero combustion. Compared with other desktop dry herb vaporizers, the Ruby Twist delivers rich, clean ruby-ball flavor at a fraction of the price. Available in wired and wireless configurations, with optional eNail compatibility for concentrate sessions. A desktop ball vape for dry herb that runs wired at home or wireless when you want to move around.
📖 New to ball vapes? Read What Is a Ball Vape? The Complete Guide.
⚙️ Click here for user settings, temperature calibration & the full manual
Download the PID controller manual (PDF) — straight from the factory, covers the panel keys, parameter list and wiring.
- Change the set temperature: in the normal display, use the up and down keys. Factory set value is 710.
- Switch °F to °C: press SET, enter password 0089, step down to CorF and set it. 0 = Celsius, 1 = Fahrenheit.
- Self-tune (AT): long press the > key until the AT light flashes and the unit tunes itself. To end it, hold > for three seconds. It only needs to be run once, not every session.
- No auto shutoff: these full size controllers hold temperature until you switch them off. The auto shutoff timer is only on the smaller controllers.
🌡️ Reading hot? Here is how to correct it
Matt’s own controller showed 615°F on the display when the glass was really closer to 550°F — about 65° hot. Yours may differ, so treat 65 as his number and adjust to whatever yours turns out to be. This is the exact sequence he used, on the four keys SET, >, ∧ (up) and ∨ (down):
- Press SET once. A password prompt comes up.
- Enter 0089. The > key moves to the next digit, the ∧ key raises it. Press SET to accept.
- Now tap SET and watch the screen. It steps in this order: inty → outy → HY → psb. That is four taps to land on psb.
- On psb, press ∨ down to -065. A four digit screen writes -65 as -065, so that is correct. This tells the controller it has been reading 65° too hot.
- Keep tapping SET past rd and Corf until it reads End. It drops back to the normal screen on its own.
Go by what the screen says rather than by counting taps. If you land on outy you are one short, and if you hit rd you went one too far.
After this, the heat you always ran is 550 on the dial, not 615. The number moved. The heat did not.
Ruby Twist Wired and Wireless: Heater Specs from Crossing
- Housing: titanium Ruby Twist Injector with gemstone-cut rubies inside, and the signature Twist airflow mechanism beneath the gemstones
- Heater: 20mm heater coil with a silicone handle pre-installed, plus a pre-installed heat guard for the housing
- Temperature: runs best between 270 and 330C, with about 305C recommended for the standard bowl (the older Thermal Twist ran 300 to 370C)
- Dock station: clamps your coil and connects it to your PID controller, made for Crossing’s 20mm and 25mm axial coils
Crossing’s own warning: not all XLR ports are the same. Confirm your PID controller wiring matches before plugging in a coil, because the wrong pinout can permanently damage the coil and the controller.
The Ruby Twist Family: Kits, Heaters & Parts
- Ruby Twist Original Kit
- Ruby Twist Pro Kit
- Ruby Twist Wired & Wireless Kit (this page)
- Wireless Ruby Ball Vape Simple Kit
- Ruby Twist + Terp Slurper Bundle
The Ruby Twist line is made by Crossing Technology. Not sure what fits your setup? Email matt@ineedhemp.com and we’ll sort it out.































Scotch43 (verified owner) –
MY RUBY TWIST is the BEST TYPE OUT THERE.YOU NEED THIS ONE I DEFINITELY RECOMMEND BUYING ONE
Scotch43 (verified owner) –
BOTH MATT AND GREG ARE GREAT PEOPLE TO DO BUSINESS WITH. THEY HAVE BEEN HELPING ME OUT WITH SHIPPING AND ARE REALY A NOTCH ABOVE THE OTHER COMPANYS MY RUBY TWIST is the BEST TYPE OUT THERE.YOU NEED THIS ONE I DEFINITELY RECOMMEND BUYING any of their products.